Six serial server RS232/RS485/RS422 transfer network /Modbus TCP to RTU

Six Serial Server RS232 RS485 RS422 Transfer Network Modbus TCP To RTU
  • Seller BETTERSHENGSUN SHENGSUN Store
  • List Price US $110.00piece
  • Sale Price US $110.00piece
  • You Save US $0.00piece0% off
  • Shipping Free Shipping
  • Ratings 5.0 (50)

Item Specifics

Test14
Test44
Brand NameBETTERSHENGSUN
is_customizedYes

Product Description

110$/PCS
ZQWL-EthRS-E6 is a multi function, high performance, high stability of the serial server module. It has 6 serial ports, each serial port supports RS232/485/422 three modes of arbitrary switching; 1 way 10M/100M adaptive Ethernet interface. Users can easily complete the interconnection between serial devices and network devices.
Two, hardware parameters
Serial number
Name
parameter
One
Model
ZQWL-EthRS-E6
Two
Power Supply
DC9~36V wide voltage power supply
Three
CPU
32 bit high performance processor
Four
Ethernet interface
10M/100M adaptive Ethernet interface, 2KV electromagnetic isolation
Five
serial port
A total of 6 serial ports, each serial port supports RS232/RS485/RS422 three operating modes of arbitrary switching; baud rate 600~1024000, DB9 by the male head, interface with ESD protection function
Six
Reset / restore factory settings
With reset / restore the factory set signal
Three, network characteristics
Support static and dynamic IP;
Support for direct cross cable automatic switching
Work port, target IP and target port can be set;
TCP server mode, each serial port are supported by 4 client connections, multiple users can simultaneously manage a serial device;
Support DNS function;
Support network online upgrade firmware function;
Can cross segment communication, switch, router; can work in LAN, can also work on the internet;
Support agreement, including ETHERNET, ARP, IP, ICMP, UDP, DHCP, TCP;
Support TCP Modbus to RTU. Modbus
Support page parameter configuration and password login.
Module parameter configuration
This module can be configured through the "intelligent embedded serial server configuration software" and the way of the web page. Note that the module is only reset after the new set of parameters to take effect.
(a) through the intelligent embedded serial server configuration software configuration parameters
The following parameters can be configured: IP module, subnet mask, gateway, DNS server, MAC address (you can also use default parameters), 6 serial bus; the module can also upgrade firmware through configuration software.
The method used is as follows:
1, the module through the network cable and computer or router connection, and to the module on the power, RUN lights flashing (about 1Hz) said the module to start the normal.

Similar Products